Semi-Automatic Welding Specialist at the Nigerian National Petroleum Corporation (NNPC)

Semi-Automatic Welding Specialist at the Nigerian National Petroleum Corporation (NNPC) – Abuja & Kaduna

Nigerian National Petroleum Corporation (NNPC)

Semi-Automatic Welding Specialist at the Nigerian National Petroleum Corporation (NNPC) – Abuja & Kaduna. Please make sure you read the job requirements before applying for this position.

The Nigerian National Petroleum Corporation (NNPC) is currently embarking on the construction of 40” X 614km Ajaokuta-Kaduna-Kano Gas Pipeline and Stations (AKK). The AKK Pipeline is a section of the Trans-Nigerian Gas Pipeline Network. The Segment 2 scope covering a distance of about 318.66 km of the Trans Nigeria Gas Pipeline and stations was awarded to Brentex CPP Limited for the Engineering, Procurement and Construction of Ajaokuta-Kaduna-Kano (AKK) Gas Pipeline and Stations Project.

As an equal opportunity employer, Brentex CPP Limited welcomes applications for the position below to serve on the Ajaokuta-Kaduna-Kano (AKK) Gas Pipeline Project (Segment 2) Operation:

Job Title: Semi – Automatic Welding Specialist

Locations: Abuja (FCT) and Kaduna

Job Description

  • Read blueprints and drawings and taking measurements to plan layout and procedures.
  • Determine the appropriate welding equipment or method based on requirements.
  • Set tip components for welding according to specifications.
  • Welds metal parts together using both gas [Welder GasI or brazing [Brazer, Assembler] any combination of arc processes [Welder Ard.
  • Perform related tasks, like thermal cutting grinding.
  • May locate and repair cracks in industrial enne cylinder heads using inspection equipment gas torch, and be desnated Repairer, Cylinder Heads.
  • Operate angle grinders to prepare the parts that must be welded
  • Weld components using manual or sen-automatic welding equipment in various positions (vertical, horizontal, or overhead).
  • Repair machinery arid other components by welding pieces and filling gaps
  • Test and inspect welded surfaces and structure to discover flaws.
  • Maintain equipment in a condition that does not compromise safety.
  • SMAW-flat, vertical,horizontal,and over head positions.
  • FCAW gas-shielded aol self-shielded wire – flat, vertical, honzontal, and overhead positions.
  • Oxy / acetyleneorory / polypropylene work.

Required Certification & Course of Study

  • Higher National Diploma / B.Tech / B.Eng. in Engineering or Physical Sciences.
  • National Business and Technical Examinations Board (NABTEB)
  • City & Guild Level 3.
  • ASNI certification
  • AW Scertiftcationl CSWlP or its equivant
  • Years of Experience: 8 years

Skills:

  • Ability to interpret drawings and weld symbols per AWS A2.4.
  • Knowledge of AWS 01.1, D1.6, 012 and ASME B313 fabrications and welding requirements.
  • Proven work experience in simdar job.

Application Closing Date

1st January, 2024.

Method of Application

Interested and qualified candidates should send their Applications to: [email protected] using the Job Title as the subject of the mail.

To apply for this job email your details to hr.department@brentexcpp.com