How to Polish Boots - NewBalancejobs
Career Advice Career Basics

How to Polish Boots

The best way to make your boots look good as new is to give them a little polish. Do you have an old pair of boots you don’t know how to polish?.

Then it would be best if you read this article, as we would educate you on the materials needed and the step-by-step guide to polish your boots.

SEE ALSO: How to Make a Resume on iPhone Easily

Materials Needed for Polishing Your Boots

1. Shoe Polish

Shoe polish is of two types; a cream or a wax. You can choose either of the two based on the finishing you want

A Cream Polish

A cream polish gives less shine. However, it moisturizes the leather as it is absorbed. Note that cream polish can affect the leather color, so be careful while applying.

A wax polish

A wax polish gives an additional layer of shine, covers scuffs, and protects the leather.

Ensure you choose the wax polish that matches closely with the color of your shoes.

If you can’t find an exact match, you can use a neutral or uncolored polish. However, it will only add shine and not add color.

2. A Polishing Cloth

A good polishing cloth can make the difference in getting the proper shine.

While an old T-shirt or rag can do the trick, we recommend a polishing cloth, as you can purchase specific ones to suit your shoe types.

3. A Clean Rag

Once you’ve polished your shoes, you’ll need a clean rag at hand for cleaning your shoe or wiping any access polish.

4. A Horsehair Buffing Brush

Horsehair brushes are the best shoe shining brushes. They have been sturdy but soft enough not to scratch the leather.

Aside from that, they help raise the leather fibers to create a tremendous shiny surface.

5. Welt Brush

This is a small brush, and it helps to scrub the dirt out of the welt strip and apply polish to those small, hard-to-reach areas.

6. A Cup of Water

A cup of water is needed at the last steps of achieving a great shine.

SEE ALSO: How to answer a customer service call

How to Polish Your Boots

Below are the five easy steps to polish your boots. After which your boots will have a beautiful shine.

Step 1: Preparation

Before you polish your boots, prepare your space by gathering the materials you will be needing together and covering the surface you will be working on with a towel or newspaper to prevent mess.

Also, ensure your boots aren’t wet, remove the laces, and stuff the boots with paper to give you a firmer surface to work on

Step 2: Clean Off Dirt

Bang the boots together to knock off excess dirt or mud out of the bottom of the sides.

Another style is to use an old shirt, a towel, or dirty socks and run it over to remove dust or dirt.

Use the welt brush with a touch of water to get into small spaces.

Give your shoe a thorough check before moving on to the next step, as dirt might cause permanent scratches to the leather and spread your polish unevenly.

Step 3: Apply the Polish

Wrap the microfiber polishing cloth over your fingers tightly. After that, you add a small amount of your preferred polish to the cloth, then apply the polish to one part of your boot at a time and rub it in tight circles.

Apply light pressure and work this into every inch of the leather and apply a few layers of polish over every part of the boot. Allow the polish to dry on your boots for approximately 10 minutes.

Step 4: Buff the Polish

After 10 minutes, buff the polish with your horsehair brush to spread the product evenly. Use your horsehair brush to make even strokes across your boots.

Five or six swipes are appropriate to spread the polish evenly. This step evens out the layers of polish you’ve applied to avoid dark spots on the leather.

Step 5: Shine Your Boots

Once you have applied and evened out the polish, what’s left is to shine the boots!
Dampen a clean microfiber towel with water.

Use the same method you used to apply the polish to shine your boots. That is, rubbing it in small circles to create a beautiful shine.

After that, allow your boots to dry for 15-20 minutes. Then you are good to go anywhere with your boots looking good as new!

SEE ALSO: How to Get a Job in Marketing and Advertising

Conclusion

The best way to make your boots look good as new is to give them a little polish.

To polish your boot, you’ll need essential materials such as shoe polish, a buffing brush, a cloth, and a cup of warm water.

Clean off the dirt from your boots and apply the polish in a small circular motion. Buff the polish with a horsehair brush to spread the product evenly. Dampen a rag into the water and rub it in small circles until it comes to a shine.